The DLLs can be configured through the Control Panel as follows: Click Control Panel/Administrative Tools/Microsoft .NET Framework 1.1 Configuration. The .NET Configuration 1.1 dialog appears: In the .NET Configuration 1.1 dialog, you should see one or more of the Infragistics .dlls as shown above. If you do, you can skip to Step #5. If you do not, you can either add all four Infragistics .dlls to your machine or just the application you are testing. To add the .dlls to your: computer, click My Computer/Configured Assemblies application, click Applications//Configured Assemblies Right click on Configured Assemblies and select Add. On the Configure an Assembly dialog, you select assemblies to add. After you add the assemblies, you must change the binding policy for each of them by right clicking the assembly name and selecting Properties. In the Properties dialog, select the Binding Policy tab. Click in the "Requested Version" column and enter the requested version that SilkTest uses, 4.3.20043.27. Then, click under the "New Version" column and enter the new version, which is the .dll your application requires. The screen below shows requested and new version information filled in for the Infragistics.Win.UltraWinToolbars.v4.3: Repeat Steps # 5 - 7 for each of the other assemblies. Click OK to save the information. When you restart your application and start testing, the.dlls that SilkTest requires are redirected to use the .dlls that your application requires. NB: Additional information can be found in the SilkTest help, Index tab under Infragistics controls: binding .dll files Old KB# 21248
↧